The largest of the 4000 series models, the flagship 4040A is designed for larger fixed installations that demand higher playback levels and greater low frequency extension.
4040A Installation Speaker
SPL
109 dB
Amplifier Power
120 W Bass (Class AB) + 120 W Treble (Class AB)
Frequency Response
50 Hz - 25 kHz (-6 dB)
Accuracy of Frequency Response
± 3 dB (55 Hz - 20 kHz)
Driver Dimensions
⌀ 165 mm Bass + ⌀ 19 mm Treble (view in inches)
Dimensions
H 350 x W 237 x D 223 mm, (view in inches)
Weight
9.9 kg / 21.8 lb
Connections
1 x Euroblock Analog Input
4040A Installation Speaker
Technical Specifications
The largest of the 4000 series models, the flagship 4040A is designed for larger fixed installations that demand higher playback levels and greater low frequency extension.
System Specifications
Frequency Response
55 Hz - 20 kHz (± 3 dB)
Low cutoff -6dB
50 Hz
High cutoff -6dB
25 kHz
SPL
Short term max SPL Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 1 m.
≥109 dB
Long term max SPL Maximum long term RMS acoustic output in same conditions with IEC weighted noise (limited by driver unit protection circuit) at 1 m.
≥101 dB
Self-generated noise
Self-generated noise Self generated noise level in free field at 1m on axis (A-weighted).
≤10 dB
Weight
Weight9.9 kg (21.8 lb)
Dimensions
Height
350 mm
Width
237 mm
Depth
223 mm
Enclosure
Enclosure material
Die cast aluminium
Enclosure type
Reflex port
Drivers
Driver type
Cone
Diameter
165 mm
Driver type
Metal dome
Diameter
19 mm
Directivity
Harmonic distortion
> 100 Hz ≤0.5 %
Amplifier Section
Amplifiers
120 W Class AB
120 W Class AB
Mains voltage
100-240 VAC 50/60Hz
Power consumption
ISS Active
≤0.5 W
Idle
≤15 W
Full output
170 W
Signal processing section
Connectors
Input Audio input is via a 10 kOhm balanced connector.
Crossover
Bass/Treble
2500 Hz