Technical Specifications
![](/o/genelec-site-theme/images/icons/tech_specs/specs_icon_spl.png?)
SPL
104 dB
![](/o/genelec-site-theme/images/icons/tech_specs/specs_icon_amp_power.png?)
Amplifier Power
50 W Bass (Class D) + 50 W Treble (Class D)
![](/o/genelec-site-theme/images/icons/tech_specs/specs_icon_frequency_response.png?)
Frequency Response
45 Hz - 23 kHz ("-6 dB")
![](/o/genelec-site-theme/images/icons/tech_specs/specs_icon_accuracy_frequency.png?)
Accuracy of Frequency Response
± 1.5 dB (58 Hz - 20 kHz)
![](/o/genelec-site-theme/images/icons/tech_specs/specs_icon_driver.png?)
Driver Dimensions
⌀ 130 mm Bass + ⌀ 19 mm Treble (view in inches)
![](/o/genelec-site-theme/images/icons/tech_specs/specs_icon_dimensions.png?)
Dimensions
H 299 x W 189 x D 178 mm, with Iso-Pod™ (view in inches)
![](/o/genelec-site-theme/images/icons/tech_specs/specs_icon_weight.png?)
Weight
5.1 kg / 11.2 lb
![](/o/genelec-site-theme/images/icons/tech_specs/specs_icon_connectors.png?)
Connections
1 x XLR Analog Input
1 x XLR AES/EBU Input
1 x XLR AES/EBU Output
2 x RJ45 Control
8330A
SAM™ Studio Monitor
Technical Specifications
Combining precision, adaptability and a small footprint, the 8330A offers colour-free performance and powerful room compensation features.
![](http://images.ctfassets.net/4zjnzn055a4v/5WVJtfxlX44iIXmHCCzz9j/e290df0c91e2812b7bd5544125b82201/8330A01.jpg?w=300)
System Specifications
Frequency Response
58 Hz - 20 kHz (± 1.5 dB)
Low cutoff -6dB
45 Hz
High cutoff -6dB
23 kHz
![](http://images.ctfassets.net/4zjnzn055a4v/4fDPrr1DZeKwqWSKCskgqM/7081474731c24100e41bd6420c351639/8330_horizontal_response.png?w=800)
SPL
Peak SPL Maximum peak acoustic output per pair at 1 m distance with music material.
≥110 dB
Short term max SPL Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 1 m.
≥104 dB
Long term max SPL Maximum long term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver unit protection circuit) at 1 m.
≥96 dB
Self-generated noise
Self-generated noise Self generated noise level in free field on axis (A-weighted).
≤5 dB SPL
Weight
Weight5.1 kg (11.2 lb)
Dimensions
Height
285 mm
Height with Iso-Pod
299 mm
Width
189 mm
Depth
178 mm
![](http://images.ctfassets.net/4zjnzn055a4v/5bbG1onuGcQKQgUWsUUwSQ/e3ad27a54f3aff95a737addd8063191a/8330a_views.png?w=800)
Enclosure
Enclosure material
Die cast aluminium
Enclosure type
Reflex port
Drivers
Driver type
Cone
Diameter
130 mm
Driver type
Metal dome
Diameter
19 mm
Directivity
![](http://images.ctfassets.net/4zjnzn055a4v/4M1mMdR5Vb4dh0LaNscoSh/e302fb0a4ed31b2e025b1e7f7c57d5e8/8330A_vertical_directivity.png?w=600)
![](http://images.ctfassets.net/4zjnzn055a4v/72LQ4qC9HFhVwY2lRcS4Wv/7ba0a1d41f45bf83bd4a8f753aa1c047/8330A_horizontal_directivity.png?w=600)
Harmonic distortion
> 100 Hz ≤0.5 %
Group delay
The latency at high frequencies from the input to the acoustic output, measured in the analog input:
Extended Phase Linearity in GLM set to OFF
2.9 ms
In Genelec performance graphics, the time of converting the from an electronic input signal to the acoustic output in a Genelec monitor is described by two factors – latency and group delay. The group delay factor can be read in the graphics for a specific frequency. The total frequency-specific input-to-output delay is a sum of the latency and group delay factors. To understand the significance of this total delay, consider that moving a loudspeaker away by 1 meter creates an additional delay of about 3 ms.
![](http://images.ctfassets.net/4zjnzn055a4v/6TFGLkddUrb75hnbOqADDf/d69bce76b7f352b9e3e655852e080eba/8330A_GD.jpg?w=800)
Amplifier Section
Amplifiers
50 W Class D
50 W Class D
Mains voltage
100-240 VAC 50/60Hz
Power consumption
ISS Active
≤0.5 W
Idle
≤3 W
Full output
50 W
Signal processing section
Connectors
Input Analog signal input connector XLR female, balanced 10 kOhm.
Input XLR female IN
Output XLR male OUT
2 x Control Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.